For automotive professionals and enthusiasts seeking a comprehensive and reliable Diagnosis Kit For Cars, the Automotive Diagnostics Kit ADK610004D stands out as an exceptional solution. This meticulously assembled kit from TiePie engineering provides a powerful suite of tools designed to tackle a wide spectrum of automotive diagnostic challenges, from intricate sensor issues to complex CAN bus communication analysis. Packed within a robust protective carry case, the ADK610004D is your portable powerhouse for efficient and accurate vehicle diagnostics.
Unpacking the Power of the ADK610004D Diagnosis Kit
The Automotive Diagnostics Kit ADK610004D is centered around the advanced Automotive Test Scope ATS610004D-XMSG, a high-performance automotive oscilloscope that forms the core of your diagnostic capabilities. Its impressive 1 GS/s sampling rate and substantial memory depth are crucial for capturing and dissecting rapid signals, such as those found in modern vehicle networks like CAN bus systems. This capability is essential for diagnosing intermittent faults and complex digital communications within today’s vehicles.
Beyond the oscilloscope, the kit is thoughtfully curated with a range of accessories to address both common and less frequent automotive malfunctions. Whether you’re investigating sensor or actuator failures, ignition system irregularities, timing discrepancies, or power deficiencies, the ADK610004D provides the necessary tools. For practical examples of how these tools can be applied, explore our extensive collection of automotive articles detailing solved diagnostic cases.
The Automotive Diagnostics Kit ADK610004D includes the following components:
| Quantity | Item | Description |
|---|---|---|
| 1 | Automotive Test Scope ATS610004D-XMSG | The heart of the kit: a 4-channel, 1 GS/s automotive oscilloscope featuring switchable differential/single-ended inputs with SafeGround protection, SureConnect connection verification, resistance measurement, a 250 MHz bandwidth, 14-bit resolution, and a massive 256 MS memory. |
| 4 | Measure lead TP-C1812B | |
| 1 | Back Probe TP-BP85 – Set of 8: Green, Blue, Yellow, Red, 4 Black | A set of 8 slender and flexible back probes, rated at 1000 V CAT III with 4 mm banana sockets. |
| 2 | Ignition Pickup TP-IP250 | |
| 1 | Current clamp TP-CC80 | An 80 A current clamp with 2% accuracy and 4 mm shrouded banana sockets for precise current measurements. |
| 1 | Current clamp TP-CC600 | |
| 1 | Accelerometer TP-ACC20 – 09 | A dual-axis accelerometer with a ±2 g range and 420 mV/g sensitivity for vibration and engine power analysis. |
| 4 | Differential attenuator TP-DA10 | |
| 1 | Alligator Clip TP-AC50B | A set of 5 alligator clips with a 10 mm clamping range and 4 mm banana socket, 60 V rated for versatile connection options. |
| 1 | Carry case BB451 |
Optionally, enhance your Automotive Diagnostics Kit ADK610004D with:
| Quantity | Item | Description |
|---|---|---|
| 1 | ATIS Lite | Automotive Test and Information System Lite: A comprehensive knowledge base offering general information for automotive problem diagnosis. |
| 1 | ATIS Pro |
For in-depth specifications and features of each item within the Automotive Diagnostics Kit ADK610004D, please refer to the description tab on each product page.
The Automotive Diagnostics Kit ADK610004D is more than just a collection of tools; it’s a carefully selected system designed to streamline your diagnostic process and improve accuracy.
The Powerhouse: Automotive Oscilloscope ATS610004D-XMSG
At the heart of this premier diagnosis kit for cars is the Automotive Test Scope ATS610004D-XMSG. This sophisticated PC oscilloscope transforms your computer into an advanced automotive diagnostic station. Equipped with four differential inputs, it allows for safe and accurate measurement of multiple signals simultaneously, eliminating the risk of short circuits through the instrument. Its USB power simplifies connectivity with laptops, enabling on-the-go diagnostics directly within the vehicle. The wide input range, deep memory buffers, and high sampling rate ensure capture of virtually any automotive signal. Furthermore, the integrated SureConnect connection test feature on each channel provides immediate confirmation of a solid electrical connection, removing guesswork and ensuring reliable measurements.
Read Automotive Test Scope ATS610004D-XMSG details
Enhance Your Knowledge with the Automotive Test and Information System
The ATIS Automotive Test and Information System is an invaluable resource included (optionally) within this diagnosis kit for cars. It’s an extensive knowledge base encompassing virtually all electrical and electronic components within a car’s engine management system. ATIS provides an intuitive graphical interface to access background information on sensors and actuators, detailed schematics, diagnostic procedures, component locations with photographic aids for a vast range of vehicles, and example signal waveforms for correctly functioning components. A key advantage of ATIS is its seamless integration between diagnostic instructions and corresponding example signals for your measuring instruments. With a single click, you can launch the automotive measurement software directly from ATIS, automatically loading the specific instrument settings required for the component you are testing. This direct link allows technicians to focus on problem identification rather than instrument setup.
The Automotive Diagnostics Kit ADK610004D offers the flexibility to include either ATIS Lite or the more comprehensive ATIS Pro. ATIS Pro expands upon the Lite version with a significantly larger database, offering more schematics, connection diagrams, and pre-configured oscilloscope settings with reference signals for advanced diagnostics.
Precision Measurement with Included Leads
Essential for connecting the Automotive Test Scope ATS610004D-XMSG to vehicle circuits, the Automotive Diagnostics Kit ADK610004D comes equipped with four specialized Measure lead TP-C1812Bs. These 3-meter low-noise BNC to 4 mm banana measuring leads are engineered for use with differential oscilloscope inputs. The design allows for a 2-meter separation between the banana plug ends, minimizing external interference. The 3-meter length is ideal for in-vehicle measurements, allowing connection to components under the hood while the instrument remains conveniently placed inside the vehicle. Constructed from heat and oil-resistant silicone, these leads are built for the demanding automotive environment. The 4 mm banana plugs ensure compatibility with a wide array of test points and clamps.
Read Measure lead TP-C1812B details
Current Clamps for Comprehensive Circuit Analysis
For measuring high currents, such as starter motor draw, the Current clamp TP-CC600 is included in the Automotive Diagnostics Kit ADK610004D. This clamp enables current measurement up to 600 A without circuit interruption. Simply clamp it around a wire to measure current flow, revealing issues that voltage readings alone might miss, such as compression problems evident in starting current patterns.
Read Current clamp TP-CC600 details
For lower current measurements, the diagnosis kit for cars also includes the 80 A Current clamp TP-CC80. Ideal for currents up to 80 A, this clamp provides higher accuracy at lower current levels compared to the TP-CC600. It’s perfect for diagnosing injector circuits, measuring parasitic draws, and other lower current applications.
Read Current clamp TP-CC80 details
Back Probes for Non-Invasive Testing
The Automotive Diagnostics Kit ADK610004D includes a set of Back Probe TP-BP85s, essential for accessing hard-to-reach test points. These slim, flexible probes connect to any 4 mm banana plug test lead and allow for back-probing connectors without circuit disruption, eliminating the need for breakout boxes and preventing wire insulation damage. The set of 8 probes, color-coded to match the Automotive Test Scope ATS610004D-XMSG input channels, enhances usability and organization.
Read Back Probe TP-BP85 details
Safely Measure Ignition Signals with Ignition Pickups
For safe measurement of high-voltage secondary ignition signals, the Ignition Pickup TP-IP250 is an integral part of this diagnosis kit for cars. Simply clamp the Ignition Pickup TP-IP250 around a spark plug cable to measure secondary ignition signals from both conventional and distributorless ignition systems (DIS). Two pickups are included for versatile ignition diagnostics.
Read Ignition Pickup TP-IP250 details
Accelerometer and Manual Trigger Button for Advanced Analysis
The Accelerometer TP-ACC20 – 09 combines a dual-axis accelerometer with a manual trigger button, expanding the diagnostic capabilities of the kit. It connects to the Automotive Test Scope ATS610004D-XMSG extension connector and two input channels.
The dual accelerometer measures accelerations up to ±2 g in two axes, enabling vibration analysis in mechanical systems. It can also be used to estimate engine power without requiring expensive dynamometer equipment. By attaching the sensor to the vehicle floor and performing a full-power acceleration, the software can calculate engine power based on vehicle weight and measured acceleration.
The manual trigger button allows for capturing transient events when the trigger conditions are unknown. Connect the oscilloscope to the sensors under investigation and initiate a recording. When an issue occurs, such as engine hesitation, pressing the manual trigger button captures the signals, including pre-trigger data, for post-event analysis of the problem’s development.
The manual trigger button can be used independently of the accelerometer, adding further flexibility to your diagnostic approach.
Read Accelerometer TP-ACC20 details
Differential Attenuators for Extended Voltage Range
While the Automotive Test Scope ATS610004D-XMSG boasts an 80 V full-scale input range suitable for most automotive signals, the Differential attenuator TP-DA10 extends this capability when higher voltages are encountered. This 1:10 differential attenuator increases the input range of the oscilloscope, crucial for measuring signals like primary ignition voltages or fuel injector waveforms. The Automotive Diagnostics Kit ADK610004D provides a Differential attenuator TP-DA10 for each oscilloscope channel, ensuring comprehensive high-voltage measurement capability.
Read Differential attenuator TP-DA10 details
Versatile Connections with Alligator Clips
For connecting to diverse terminals where back probes are unsuitable, the Alligator Clip TP-AC50B is included in the diagnosis kit for cars. These clips are compact enough for confined spaces yet offer sufficient clamping range for larger objects. The kit includes five Alligator Clip TP-AC50Bs for versatile connectivity in various automotive applications.
Read Alligator Clip TP-AC50B details
Organize and Protect with the Convenient Carry Case
The Carry case BB451 provides secure and organized transport for your automotive diagnostic tools. Custom-designed compartments within the case ensure dedicated storage for all components of the Automotive Diagnostics Kit ADK610004D, including the Automotive Test Scope ATS610004D-XMSG, measure leads, current clamps, test probes, ignition pickups, and more.
Downloads and Resources
Enhance your Automotive Diagnostics Kit ADK610004D with the latest software, drivers, and manuals, available for download below:
Driver & Software
| Description | Version | Remarks | Size |
|---|---|---|---|
| WinUSB driver | 10.0.2 | Windows 10 / 11, 64 bit | 1.73 MB |
| Multi Channel software | 1.47.0 | Windows 10 / 11, 64 bit, including PDF manual | 103.76 MB |
Manuals & Documents
| Description | Version | Remarks | Size |
|---|---|---|---|
| Accelerometer TP-ACC20 user manual | 1.3 | English | 875.29 kB |
| Automotive Test Scope ATS610004D-XMSG Instrument manual | 2.49 | English | 965.21 kB |
| Brochure for Automotive Diagnostics Kit | English | 1.72 MB | download |
| Current clamp TP-CC600 user manual | 1.3 | English | 293.49 kB |
| Current clamp TP-CC80 user manual | 1.3 | English | 305.46 kB |
| Differential attenuator TP-DA10 user manual | 1.3 | English | 207.01 kB |
| Ignition Pickup TP-IP250 user manual | 1.3 | English | 228.82 kB |
| Measure lead TP-C1812B user manual | 1.4 | English | 453.24 kB |
| Multi Channel software manual | 1.11 | English | 3.13 MB |
